Tips For Replacing a Window Handle
The replacement of the handle on your window is an easy project that can be completed in the comfort of your own home. Follow these guidelines to ensure a smooth and beautiful finish.
Take off the screw covers from your uPVC handle to expose the screws. Measure the spindle's length to ensure that you get the right size replacement.
1. Take a measurement of the length of the Spindle.
It's important that you ensure the correct size of the spindle when replacing a window handle. This is because it will determine how tight or loose the handle is and whether it will lock correctly within the frame of the window. The spindle is a metal shaft that connects the handle and the lock in the window frame. The spindle could be a standard industry 8mm cross-section or the earlier 9mm versions. Modern industry standards are 8mm, but it wasn't always that way. It is essential to check the measurements when purchasing the handle you want to purchase.
The easiest way to measure the length of the spindle is to remove the existing handle, this can be done by turning it into the open position and unscrewing the two screws (which could be hidden behind plastic caps that will need to be removed) that retain the handle. Once the handle is removed, measure the distance from the base to the end. This will provide you with the measurements you need to buy a new one.
There are plenty of options when it comes to selecting a new window handle from sleek chrome that fits into a contemporary home to traditional brass with a burnished finish that looks great in restored Georgian rooms, or the more classic Tudor cottages with curled monkey tail latches! The possibilities are endless, but the most important thing is to select a style that is suitable for your home.
Espag handles are typically installed to uPVC windows and are the same size with 43mm centres (2 fixings). Cockspur handles are available in a variety of sizes, ranging from 58mm to 62mm. Cadenza window handles have a different size due to their angle blade that operates a multi-point lock mechanism inside the window.
When choosing a window handle take into consideration the hand you use to open your door. Inline Espag handles can be used with either left or right-handed windows. Cranked window handles are hand-operated and are only used on windows that open in only one direction.
2. Remove the Handle
A window handle that has fallen out can be frustrating, whether the handle is damaged or worn out. However, the good news is that replacing the uPVC window handle is a straightforward task that you can complete yourself. All you need are a few basic tools and some time to complete the job.
You must first open the window and then ensure that it's not locked. Then, you need to remove the screw caps holding the handle in position. After these have been removed, you can start to work on removing the handle itself.
The handle is attached to a spindle inside the window frame. The handle is fixed with either a screw or pin according to the type of handle. The most commonly used handles are the inline Espagnolette and the cockspur handles. Both types of handles can be found on casement windows, as well as aluminium ones. They can be locked with a key to prevent unauthorised opening of the window from the outside, or you can lock them by turning the handle clockwise.
To remove the handle you will need to use a screwdriver with a flat blade to release the clip holding the handle. When this clip is released the handle will fall off the spindle. Once the handle that was previously used has been removed, you'll have to take a measurement of the length of the spindle to make sure that the new handle is a good fit.
Once you have the correct size, you can now screw the new handle in place. You must make sure that the new handle is firmly attached and that it turns in the correct direction (clockwise for open or counterclockwise for closed). It is essential to ensure that the handle has not been installed upside down.
Then, you must replace the screw cap caps. After you've done this, you can test the handle to confirm that it works correctly. It is also recommended to test the locking mechanism by moving the handle until it is locked position, and then back to the locked position.
3. Take off the Screws
A uPVC window handle is a crucial component of every home and is often the first item to exhibit signs of wear and tear or damage. This could be due natural factors, regular use, or even damage caused by criminals looking to gain access to your home. A simple replacement can solve the issue and stop it from occurring again.
UPVC handles can also be difficult to remove when the locking mechanisms aren't working properly. It's often possible to solve the issue by replacing the multipoint locking mechanism, rather than the entire handle. This could save you money.
Once you've removed the old handle, you'll have to take off the screws that were fixing it to the base. These screws are usually located on the inside of the handle's base. It may be necessary to use a screwdriver in order to accomplish this. Be cautious not to over tighten the handle as this could cause it to loosen.
Then, you'll need to locate the screws or pins that keep the handle in place. Again these are likely to be located on the inside of the base of the handle and you'll need either a screwdriver or pair of pliers to take them off the screws. Once they're removed you will need to replace the caps on the screws should you choose to do so and test the new handle to ensure it's working correctly.
Install the handle by adjusting the spindle with the cutout in the window mechanism. Then, screw it in. Make sure that the handle is in an open position and that the screws are securely secured prior to replacing the screws' covers, if you wished to do this. It's done! You can enjoy your newly installed window handle. We hope this will allow you to save money on window and door replacement services in the future. If you'd like to get assistance regarding this or any other aspect of your uPVC windows do not hesitate to contact us.
4. Fit the New Handle
The process of replacing a broken window handle or updating it is simple and can be accomplished in a few easy steps. Identifying the type of window handle, measuring its spindle length, and knowing what tools you'll need to finish the job are crucial. Always prioritise safety when working with windows and tools. Take your time to follow the steps and make sure that you have the right handle to use.
upvc door handle is to locate the screws holding your existing window handle in place. Then, take them out, while maintaining a safe hold on the handle to prevent it from falling and causing injury. Once the screws have been removed, you can place them in a secure location to be replaced in the future.
After the handle that was used previously was removed, you can now begin fitting your new handle. It is essential that the handle fits perfectly to ensure it works properly and locks the window in position. The next step is to slide the square metal bar at the back of the handle into the hole of your window mechanism, ensuring that it is securely in place.
The last step is to replace the caps on the screws and test the handle to ensure it works. If you aren't satisfied with the results or if your window does not shut or open properly Contact our experts for assistance.
The majority of UK homes are equipped with uPVC Windows. Therefore, a large number of windows will need to be changed at some point due to wear and tear or breakage. Anyone with a bit of DIY knowledge can accomplish the task. It is essential that the handle you use is in line with the style and size of your window. Contact our team if you aren't sure of the kind of handle that you need. They'll be able assist you with all of the choices.